Many of Kohesi Bond’s medical grade epoxies are can resist numerous cycles of severe sterilization. This infographic gives you an overview of the various types of sterilizations and how they can affect your bonding, coating and sealing applications.

Read More →

A bonds performance is not only determined by the choice of the adhesive, but also by the surface preparation technique implemented. This can be achieved in a number of ways. Find out what surface preparation technique works best for your substrates with the help of this infogrpahic.

Read More →

Learn more about our newest cryogenic epoxy system KB 1039 CRLP with the help of this infographic. It can handle temperatures down to 4K (-269.15 ℃) and it is also capable of passing NASA standards for low outgassing (ASTM E-595).

Read More →

True one component epoxy systems are gaining increasing acceptance as compared to popular two component epoxy systems. One-part epoxies are special polymer systems where the resin and the curing agent are present in the initial mixture. This avoids the need to manually meter and mix the two components of an epoxy system, eliminating any chances […]

Read More →

Adhesive selection may seem elementary, but the importance of selecting the right product cannot be over-emphasized. There are many factors that should be considered before making your choice. Kohesi Bond’s engineers go over all the aspects of your application and help you throughout the selection process. Given below are some parameters that should be evaluated […]

Read More →

Customer’s Application The customer is manufacturing an integral cryogenic tankage for Space Transportation Systems (STS) using an aluminum honeycomb sandwiched structure. Additionally, the application demands excellent heat transfer capabilities. Application Discussion In order to recommend the right solution, our technical expert needs to find out answers to certain questions pertaining to the customer’s application: 1. […]

Read More →

Customer’s Application The customer requires an epoxy for bonding electronic components on a kapton pad to a heat sink. Superior heat transfer capabilities are of importance. Application Discussion In order to recommend the right solution, our technical expert needs to find out answers to certain questions pertaining to the customer’s application: 1. What are the […]

Read More →

Customer’s Application The customer wants to bond EUV optical substrates for lithography, where the epoxy will be exposed to immersion in acetone during cleaning. Additionally, they need the epoxy to set up relatively quickly. Application Discussion In order to recommend the right solution, our technical expert needs to find out answers to certain questions pertaining […]

Read More →