Oil & Chemical

-
KB 1039 CRLP-AO
Kohesi Bond KB 1039 CRLP-AO is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040 QF
Kohesi Bond KB 1040 QF is a two component, room temperature curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique quartz filled epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1151 S-1
KB 1151 S-1 is a two component, room temperature curing epoxy system suitable for bonding sealing and coating applications. It offers outstanding chemical resistance, particularly to fuels, solvents and alcohols.
-
KB 1372-LO
Kohesi Bond KB 1372-LO is a two component, room heat curing epoxy system suitable for bonding, sealing, and coating. It has a convenient 10:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable\y high glass transition temperature (Tg) of > 172°C. It rapidly cures at moderately elevated temperatures and can achieve even faster cures at higher temperatures.
-
TUF 1452 HT-2
Kohesi Bond TUF 1452 HT-2 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 100:40 (Part A: Part B) mix ratio by weight or 100:50 (Part A: Part B) mix ratio by volume. This unique epoxy system offers remarkable adhesion to wide variety of substrates including metals, ceramics, most plastics and glass.
-
TUF 1820 AOHT
TUF 1820 AOHT is a toughened single component system that offers very good thermal conductivity and it is cryogenically serviceable. Owing to its stunning mechanical strength properties (tensile lap shear strength of > 3,800 psi), it is commonly used for bonding and sealing applications.