One Component Products
-
KB 1427 HT
Read moreKB 1427 HT is a path-breaking one part epoxy used for bonding, sealing, coating and casting applications. It offers a roaring glass transition temperature Tg of 220°C – 230°C and stellar chemical resistance to a wide variety of fuels, oil and water.
-
KB 1427 HT-3
Read moreThis product’s unlikely low exotherm makes it ideal for use in potting up to 1/4 inch thicknesses. Being a one component system, it requires no mixing and provides ease of application. This epoxy system will not set-up unless heated above 100°C.
-
KB 1613 HT
Read moreKB 1613 HT is a one component heat curing epoxy system, that is typically used for bonding, sealing and coating applications. It offers rapid cures at elevated temperatures (5 – 10 minutes at 150°C) as well as outstanding physical strength properties.
-
KB 1613 R80
Read moreKohesi Bond KB 1613 R80 is a single component epoxy system suitable for bonding, sealing, potting and encapsulation applications. Being a one component system, it does not require any mixing and offers an unlimited working life at room temperature.
-
KB 1613 RLV
Read moreKohesi Bond KB 1613 RLV is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at elevated temperatures.
-
TUF 1613 HT-CM
Read moreKohesi Bond TUF 1613 HT-CM is a toughened, single component system that requires no mixing and cures readily at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at higher temperatures.
-
TUF 1613 HT-DA
Read moreTUF 1613 HT-DA is a true one part system that is specially formulated for die attach applications. It has an ideal dispensing profile with no tailing. In addition to superior electrical insulation, it also offers phenomenal thermal conductivity of 1.4 – 1.5 W/m/K.
-
TUF 1613 HT-GT
Read moreKohesi Bond TUF 1613 HT-GT is a single component, toughened epoxy system that requires no mixing and cures rapidly at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at elevated temperatures.
-
TUF 1613 HT-SM
Read moreKohesi Bond TUF 1613 HT-SM is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at higher temperatures.
-
TUF 1820 ANHT
Read moreKohesi Bond TUF 1820 ANHT is a toughened, single component epoxy system that offers phenomenal thermal conductivity while maintaining its superior electrical insulation properties. It requires no mixing and offers an unlimited working life at room temperature.
-
TUF 1820 AOHT
Read moreTUF 1820 AOHT is a toughened single component system that offers very good thermal conductivity and it is cryogenically serviceable. Owing to its stunning mechanical strength properties (tensile lap shear strength of > 3,800 psi), it is commonly used for bonding and sealing applications.
-
TUF 1820 HTS
Read moreTUF 1820HTS is a silver filled, single component, heat curing epoxy system. It offers excellent electrical conductivity (volume resistivity of < 0.005 ohm-cm). Also, this product is cryogenically serviceable.
-
TUF 1828 TC
Read moreKohesi Bond TUF 1828 TC is a toughened, single component, thermal management epoxy system that offers an unlimited working life at room temperature.
Showing the single result
-
KB 1031 AT-2LO
Read moreKB 1031 AT-2LO can withstand severe thermal shocks and cycling even at cryogenic temperatures. It offers an extensive serviceable temperature range of 4K (-269.15°C) to +120°C. It is a phenomenal adhesive that fosters outstanding physical strength properties and yet consolidates high peel strength and elongation.
-
KB 1031 AT-S
Read moreKohesi Bond KB 1031 AT-S is a two component, silver filled, electrically conductive epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. It offers unprecedentedly low volume resistivity (< 10-3 ohm-cm) and remarkably high thermal conductivity.
-
KB 1031 ATFL-N
Read moreKohesi Bond KB 1031 ATFL-N is a two component, highly flexibilized, nickel filled epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. Firstly, it offers very good electrical conductivity and a first-rate peel strength.
-
KB 1031 ATHT-LO
Read moreKohesi Bond KB 1031 ATHT-LO is a two component, highly toughened epoxy system suitable for bonding, sealing and coating applications. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent peel strength and is capable of passing NASA low outgassing test.
-
KB 1031 SPLV-6
Read moreKohesi Bond KB 1031 SPLV-6 is a two component epoxy system for bonding, sealing, coating and encapsulating. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. This high performance specialty product offers a unique combination of low viscosity, low exotherm and very long working life.
-
KB 1039 CRLP
Read moreKohesi Bond KB 1039 CRLP is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1039 CRLP-AO
Read moreKohesi Bond KB 1039 CRLP-AO is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040
Read moreKohesi Bond KB 1040 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, glass, ceramics, most plastics and rubbers.
-
KB 1040 AN-1
Read moreKohesi Bond KB 1040 AN-1 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers stellar thermal conductivity and is capable of passing NASA low outgassing test.
-
KB 1040 AOHT
Read moreKohesi Bond KB 1040 AOHT is an exclusive two component epoxy system suitable for bonding, sealing, coating, potting and encapsulation applications. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent thermal conductivity and an extremely low coefficient of thermal expansion (CTE).
-
KB 1040 CTE-LO
Read moreKohesi Bond KB 1040 CTE-LO is an exclusive two component epoxy system suitable for bonding, sealing, coating and encapsulation applications. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers extremely low coefficient of thermal expansion (CTE) and is capable of passing NASA low outgassing test.
-
KB 1040 P
Read moreKohesi Bond KB 1040 P is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to plastics like polycarbonates and acrylics among others without any stress cracking.
-
KB 1040 QF
Read moreKohesi Bond KB 1040 QF is a two component, room temperature curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique quartz filled epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040-2
Read moreKB 1040-2 is a low viscosity, optically clear epoxy system that cures readily at room temperature. In addition, it is capable of passing NASA standards for low outgassing (ASTM E-595). Also, it offers excellent resistance to a variety of acids, bases, oils, fuels and water.
-
KB 10473 FL
Read moreKohesi Bond KB 10473 FL is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable flexibility and peel strength. It readily cures at room temperature and can achieve faster cures at elevated temperatures.
-
KB 10473 FLAO
Read moreKohesi Bond KB 10473 FLAO is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable flexibility and peel strength.
