Showing all 13 results
-
KB 1427 HT
KB 1427 HT is a path-breaking one part epoxy used for bonding, sealing, coating and casting applications. It offers a roaring glass transition temperature Tg of 220°C – 230°C and stellar chemical resistance to a wide variety of fuels, oil and water.
-
KB 1427 HT-3
This product’s unlikely low exotherm makes it ideal for use in potting up to 1/4 inch thicknesses. Being a one component system, it requires no mixing and provides ease of application. This epoxy system will not set-up unless heated above 100°C.
-
KB 1613 HT
KB 1613 HT is a one component heat curing epoxy system, that is typically used for bonding, sealing and coating applications. It offers rapid cures at elevated temperatures (5 – 10 minutes at 150°C) as well as outstanding physical strength properties.
-
KB 1613 R80
Kohesi Bond KB 1613 R80 is a single component epoxy system suitable for bonding, sealing, potting and encapsulation applications. Being a one component system, it does not require any mixing and offers an unlimited working life at room temperature.
-
KB 1613 RLV
Kohesi Bond KB 1613 RLV is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at elevated temperatures.
-
TUF 1613 HT-CM
Kohesi Bond TUF 1613 HT-CM is a toughened, single component system that requires no mixing and cures readily at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at higher temperatures.
-
TUF 1613 HT-DA
TUF 1613 HT-DA is a true one part system that is specially formulated for die attach applications. It has an ideal dispensing profile with no tailing. In addition to superior electrical insulation, it also offers phenomenal thermal conductivity of 1.4 – 1.5 W/m/K.
-
TUF 1613 HT-GT
Kohesi Bond TUF 1613 HT-GT is a single component, toughened epoxy system that requires no mixing and cures rapidly at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at elevated temperatures.
-
TUF 1613 HT-SM
Kohesi Bond TUF 1613 HT-SM is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at higher temperatures.
-
TUF 1820 ANHT
Kohesi Bond TUF 1820 ANHT is a toughened, single component epoxy system that offers phenomenal thermal conductivity while maintaining its superior electrical insulation properties. It requires no mixing and offers an unlimited working life at room temperature.
-
TUF 1820 AOHT
TUF 1820 AOHT is a toughened single component system that offers very good thermal conductivity and it is cryogenically serviceable. Owing to its stunning mechanical strength properties (tensile lap shear strength of > 3,800 psi), it is commonly used for bonding and sealing applications.
-
TUF 1820 HTS
TUF 1820HTS is a silver filled, single component, heat curing epoxy system. It offers excellent electrical conductivity (volume resistivity of < 0.005 ohm-cm). Also, this product is cryogenically serviceable.
-
TUF 1828 TC
Kohesi Bond TUF 1828 TC is a toughened, single component, thermal management epoxy system that offers an unlimited working life at room temperature.