Industrial Adhesive Products - Epoxy, Polyimide & Sodium Silicate Systems

Kohesi Bond KB 1458 TC is a one-of-a-kind, two component, thermal management epoxy system. Firstly, this product offers phenomenal heat transfer capabilities. This products has very low thermal resistance and can be applied in layers as thin as 10 microns.

Kohesi Bond KB 1372 LP is a two component, heat curing epoxy system suitable for bonding, sealing, coating and encapsulation. It has a favorable 100:25 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.

Kohesi Bond TUF 1452 HT-2 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 100:40 (Part A: Part B) mix ratio by weight or 100:50 (Part A: Part B) mix ratio by volume. This unique epoxy system offers remarkable adhesion to wide variety of substrates including metals, ceramics, most plastics and glass.

Kohesi Bond KB 1689 is a two component, toughened, silver coated nickel filled epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. Firstly, it offers very good electrical conductivity and very low shrinkage upon cure.

Kohesi Bond KB 1631 ANHT is a two component, room temperature epoxy system suitable for bonding, sealing and coating. It has a very convenient 1:1 (Part A: Part B) mix ratio by weight or volume. Primarily, it offers stellar thermal conductivity, making it ideal for heat transfer applications. This epoxy system readily cures at room temperature and can achieve faster cures at elevated temperatures.

Kohesi Bond KB 1048 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 1:0.33 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, glass, ceramics, most plastics and rubbers.

Kohesi Bond KB 1040 P is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to plastics like polycarbonates and acrylics among others without any stress cracking.

Kohesi Bond KB 1039 CRLP-AO is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.

Kohesi Bond KB 1031 AT-S is a two component, silver filled, electrically conductive epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. It offers unprecedentedly low volume resistivity (< 10-3 ohm-cm) and remarkably high thermal conductivity.

KB 1031 AT-2LO can withstand severe thermal shocks and cycling even at cryogenic temperatures. It offers an extensive serviceable temperature range of 4K (-269.15°C) to +120°C. It is a phenomenal adhesive that fosters outstanding physical strength properties and yet consolidates high peel strength and elongation.

KB 1631 HTC-1 is a high performance two part epoxy suitable for bonding and sealing applications. This products offers stellar thermal conductivity of 1.5 – 1.6 W/m/K, it is cryogenically serviceable and it is capable of passing NASA standards for low outgassing (ASTM E-595).

KB 1151 S-1 is a two component, room temperature curing epoxy system suitable for bonding sealing and coating applications. It offers outstanding chemical resistance, particularly to fuels, solvents and alcohols.